1. During the boot cycle when the pad displays the RBA version (splash screen), key in 2-6-3-4-enter. Then press the F key.
2. Select the Telium Manager option.
3. Select initialization
4. Select Parameters
5. Select Contactless
6. Select "Yes"
7. Select "Internal" and then the Enter key
8. Some Ingenico PIN Pads may require you to hit the red x key 3 times to prompt you to save and reboot the PIN Pad.
At this point, all settings are saved. Reboot the PIN Pad and run a test NFC transaction. If you are still having trouble accepting NFC transactions, contact Datacap tech support
for more information.