Ingenico Lane/7000 - Serial Connection

Lane 7000 Face

What do I need to connect the lane/7000?

  • Ingenico Lane/7000

  • Ingenico Lane/7000 serial cable

  • Ingenico Lane/7000 power supply

  • Included serial cable adaptor

  • Included TranCloud power supply


1.)  Plug included Serial Cable Adaptor into MSR/PIN Pad port on TranCloud.  Do not use the ECR/AUX Port.

Serial Adaptor Cable
 

2.)  Plug Lane/7000 serial cable into serial cable adaptor connected to TranCloud.  

Serial Cables
 

3.)  Connect Lane/7000 power supply to 120V power outlet and to the back of the Lane/7000 serial cable.

Lane/7000 will turn on once it's connected to power.

Power supply
See the power supply port on the Lane/7000 Serial Cable

See the power supply port on the Lane/7000 Serial Cable

4.)  Connect TranCloud to 120V power outlet using included TranCloud power supply. 
 

5.)  Verify COM setting on PIN Pad is set to 'serial'. (How to change PIN Pad interface settings)

A. Press 0-0-0-1 to access the admin menu. You can make selections by touching the screen and pressing the green button.

Ingenico admin menu on Lane/7000

Ingenico admin menu on Lane/7000

B. Select “Communication type” on the screen and press “1” or the green circle button on the screen.

Lane/7000 controls

Lane/7000 controls

C. Select “RS232 / Serial” and press the green enter key. Press the red “X” key followed by the green enter key to save and reboot your settings.

RS232 / Serial on Lane/7000

RS232 / Serial on Lane/7000