Datacap Logo

Download / NETePay Options / NETePay Classic – Processors / Bluepay / BluePay Host EMV – BLH

NETePay BluePay Host EMV - BLH

Please follow the steps below to complete your installation of NETePay BluePay Host EMV – BLH

Step 1

Install Client Control

In order to communicate with this NETePay, your POS may use one of the following ActiveX controls depending on the integration method chosen by the POS developer. If you are unsure of which to install please contact POS technical support.

dsiEMVUS® 1.76

Release date: 02/12/2024

Datacap’s out-of-scope ActiveX control for NETePay supporting a variety of EMV-enabled hardware options.

For information on supported devices please see our Compatible devices page.

Release notes for v1.76

  • Support was added for PAX A3700 device.  
  • For PAX devices configured for EMV Debit Only, the contactless CVM limit is now set to zero causing a PIN prompt to occur when a Debit card is tapped regardless of the amount.  
  • For Verifone P400, P200 and M400 devices, this version explicitly enables the U01 command – external AID selection.  The previous version,1.75, disables external AID selection.  If a merchant supports Credit and Debit and a chip card includes both a Debit and Credit AID, then the card holder will be prompted with two application labels to choose between.  We cannot display “Select Debit?” like Ingenico and PAX devices.  If the POS sends a transaction with <CardType>Credit</CardType> (demands credit) or sends a transaction with <CardType>Debit<CardType> (demands debit), then external AID selection allows the specific AID to be chosen automatically without the cardholder being prompted with one or more application labels. 
  • Pre-dip functionality was added for PAX devices.  DDT-1292. The normal EMV transaction is split into two parts where the first part involves only collecting the card data and the second part involves processing a payment using the card data previously stored.  A new method (function call) is added called CollectCardData. 

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

dsiPDCX® 1.90

Release date: 02/12/2024

Datacap’s ActiveX control for non-EMV transactions using NETePay and GIFTePay software that supports dozens of plug and play hardware options, including PIN Pads, Mag stripe readers, all-in-one touch terminals and contactless readers. dsiPDCX is included as part of the dsiEMVUS download, so this control only needs to be installed for non-EMV installs.

Release notes for v1.91

  • Support was added for the PAX A3700 devices. The A3700 device supports Credit, Debit, EBT and PrePaid.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

OR

DSIClientX® 3.86

Release date: 09/01/2011

Datacap’s long-standing in-scope ActiveX control for NETePay and GIFTePay software. Generally, DISClientX should only be used for legacy installs.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Looking for a older version?

Step 2

Install NETePay BluePay Host EMV - BLH 5.06.17

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 10/23/2018

  • Fix for Adjust and AdjustByRecordNo transactions.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay BluePay Host EMV – BLH 5.06.17 (⚠ non-director installs do not support remote updates)
  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay BluePay Host EMV - BLH 5.06.16

NETePay Director

NETePay Director provides a simplified installation process with go-forward remote software updates.

Release date: 01/25/2018

  • Support added for NETePay 5 Director.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Or download NETePay BluePay Host EMV – BLH 5.06.16 (⚠ non-director installs do not support remote updates)
  • When applications are configured and running, the context menu now includes a new selection – Load Parameters (Stop/Start Director). The user can click one menu item to restart which will cause ePays to restart and reload parameters.
  • When a NETePay or GIFTePay window is opened, there are now four icons in the upper right corner that have the following functions.
    • View Merchant Parameters
    • PSCS
    • Email log
    • View log

Step 2

Install NETePay BluePay Host EMV - BLH 5.06.10

NETePay BluePay Host EMV - BLH 5.06.10

Release date: 12/14/2016

  • US EMV support for Ingenico Telium 2 devices (iSC250, iPP320, iPP350 and iCMP)

  • Added support for Ingenico TDES DUKPT P2PE.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

Step 2

Install NETePay BluePay Host - BLH 5.05.05

NETePay BluePay Host - BLH 5.05.05

Release date: 06/23/2014

  • Initial NETePay 5.0 release supporting PSCS parameter setup and activation.

Windows11 Pro / 10 Pro / Server 2019 / Server 2016

End-User License Agreement (EULA)

All Datacap software is provided ‘as-is’. Datacap makes no warranties, expressed or implied, as to merchantability or fitness for a particular purpose. Use of Datacap software is defined in an End-User License Agreement (EULA) included with each product and is presented for review during software installation.

To view the full EULA, click here.